design_iad06 (by AD3D)
Design the IAD06 (by AD3D)

10/2019. IAD06 parts

Electronic parts

x Name Info
1 NodeMCU 12E Basic IAD module
3 2n2222a transistor for the RGB driver
10 rgb led 5mm common anode the LED's
20 100 Ohm resistor for the green and blue LED (82 Ohm 1%)
10 180 Ohm resistor for the red LED (150 Ohm 1%)
1 TTP223 touch module the hidden power switch
1 5v relay module to switch the power on/off
1 micro usb module for the 5 Volt input
1 14x20 ds 60x40mm PCB PCB for the NodeMCU
1 18x24 ds 50x70mm PCB PCB for the driver module

Construction parts

x Name Info
1 12 x 12cm x 1 mm aluminium base plate for the LED stick
1 12 x 12cm x 1 mm thick white styrene bottom plate
2 8,5 x 10cm x 1 mm thick white styrene base plate for the NodeMCU and Relay module
9 26 x 7mm white styrene pipe LED holder
9 Braided sleeve green LED stick
9 1mm x 30cm Iron wire LED stick
4 82mm m3 threaded end to construct it all together
electric wire ...
nuts and bolts construction material
wood shaped as a box
NodeMCU ESP12 (by AD3D)
100 and 180 Ohm resistor (by AD3D)
5 mm RGB LED (by AD3D)
2N2222 transistor (by AD3D)
Power button (by AD3D)
Relay board (by AD3D)
Micro USB module (by AD3D)
60x40mm pcb (by AD3D)
50x70mm pcb (by AD3D)
braided sleeve green

....

10/2019. IAD06 design

Basic IAD pcb...

5 Volt RGB driver design...

Basic IAD pcb...

Top view of the box...

Inside of the box...


First steps of the IAD06 design.

....

10/2019. IAD06 diagram

The basic IAD diagram.

A NodeMCU 1.0 (ESP-12E module) on an 5 x 7 cm pcb with JST connectors.
One for the RGB LED drivers, the switch, the relay and the power input.
As option I2C and one analoge input.

The basic IAD PCB layout (bottom view).

The basic IAD PCB layout (top view).

....

10/2019. IAD06 progress


base plate for the NodeMCU and Relay module, made with the stripheater


base plate for the LED stick


5 volt RGB driver

The box made of 24 slats (18x6x100mm).



The inside.



....

10/2019. IAD06 result

The IAD06 working.

....